%64%69%72%65%63%74%20%61%69%72%20%63%61%70%74%75%72%65
-
KAIST achieves over 95% high-purity CO₂ capture using only smartphone charging power
Direct Air Capture (DAC) is a technology that filters out carbon dioxide present in the atmosphere at extremely low concentrations (below 400 ppm). The KAIST research team has now succeeded in capturing over 95% high-purity carbon dioxide using only low power at the level of smartphone charging voltage (3V), without hot steam or complex facilities. While high energy cost has been the biggest obstacle for conventional DAC technologies, this study is regarded as a breakthrough demonstrating real commercialization potential. Overseas patent applications have already been filed, and because it can be easily linked with renewable energy such as solar and wind power, the technology is being highlighted as a “game changer” for accelerating the transition to carbon-neutral processes.
KAIST (President Kwang Hyung Lee) announced on the 25th of August that Professor Dong-Yeun Koh’s research team from the Department of Chemical and Biomolecular Engineering, in collaboration with Professor T. Alan Hatton’s group at MIT’s Department of Chemical Engineering, has developed the world’s first ultra-efficient e-DAC (Electrified Direct Air Capture) technology based on conductive silver nanofibers.
Conventional DAC processes required high-temperature steam (over 100℃) in the regeneration stage, where absorbed or adsorbed carbon dioxide is separated again. This process consumes about 70% of the total energy, making energy efficiency crucial, and requires complex heat-exchange systems, which makes cost reduction difficult. The joint research team, led by KAIST, solved this problem with “fibers that heat themselves electrically,” adopting Joule heating, a method that generates heat by directly passing electricity through fibers, similar to an electric blanket. By heating only where needed without an external heat source, energy loss was drastically reduced.
This technology can rapidly heat fibers to 110℃ within 80 seconds with only 3V—the energy level of smartphone charging. This shortens adsorption–desorption cycles dramatically even in low-power environments, while reducing unnecessary heat loss by about 20% compared to existing technologies.
The core of this research was not just making conductive fibers, but realizing a “breathable conductive coating” that achieves both “electrical conductivity” and “gas diffusion.”
The team uniformly coated porous fiber surfaces with a composite of silver nanowires and nanoparticles, forming a layer about 3 micrometers (µm) thick—much thinner than a human hair. This “3D continuous porous structure” allowed excellent electrical conductivity while securing pathways for CO₂ molecules to move smoothly into the fibers, enabling uniform, rapid heating and efficient CO₂ capture simultaneously.
Furthermore, when multiple fibers were modularized and connected in parallel, the total resistance dropped below 1 ohm (Ω), proving scalability to large-scale systems. The team succeeded in recovering over 95% high-purity CO₂ under real atmospheric conditions.
This achievement was the result of five years of in-depth research since 2020. Remarkably, in late 2022, long before the paper’s publication, the core technology had already been filed for PCT and domestic/international patents (WO2023068651A1, countries entered: US, EP, JP, AU, CN), securing foundational intellectual property rights. This indicates that the technology is not only highly advanced but also developed with practical commercialization in mind beyond the laboratory level.
The biggest innovation of this technology is that it runs solely on electricity, making it very easy to integrate with renewable energy sources such as solar and wind. It perfectly matches the needs of global companies that have declared RE100 and seek carbon-neutral process transitions.
Professor Dong-Yeun Koh of KAIST said, “Direct Air Capture (DAC) is not just a technology for reducing carbon dioxide emissions, but a key means of achieving ‘negative emissions’ by purifying the air itself. The conductive fiber-based DAC technology we developed can be applied not only to industrial sites but also to urban systems, significantly contributing to Korea’s leap as a leading nation in future DAC technologies.”
This study was led by Young Hun Lee (PhD, 2023 graduate of KAIST; currently at MIT Department of Chemical Engineering) and co-first-authored by Jung Hun Lee and Hwajoo Joo (MIT, Department of Chemical Engineering). The results were published online on August 1, 2025, in Advanced Materials, one of the world’s leading journals in materials science, and in recognition of its excellence, the work was also selected for the Front Inside Cover.
※ Paper title: “Design of Electrified Fiber Sorbents for Direct Air Capture with Electrically-Driven Temperature Vacuum Swing Adsorption”
※ DOI: https://doi.org/10.1002/adma.202504542
This study was supported by the Aramco–KAIST CO₂ Research Center and the National Research Foundation of Korea with funding from the Ministry of Science and ICT (No. RS-2023-00259416, DACU Source Technology Development Project).
2025.08.25 View 3428 -
KAIST Develops AI to Easily Find Promising Materials That Capture Only CO₂
< Photo 1. (From left) Professor Jihan Kim, Ph.D. candidate Yunsung Lim and Dr. Hyunsoo Park of the Department of Chemical and Biomolecular Engineering >
In order to help prevent the climate crisis, actively reducing already-emitted CO₂ is essential. Accordingly, direct air capture (DAC) — a technology that directly extracts only CO₂ from the air — is gaining attention. However, effectively capturing pure CO₂ is not easy due to water vapor (H₂O) present in the air. KAIST researchers have successfully used AI-driven machine learning techniques to identify the most promising CO₂-capturing materials among metal-organic frameworks (MOFs), a key class of materials studied for this technology.
KAIST (President Kwang Hyung Lee) announced on the 29th of June that a research team led by Professor Jihan Kim from the Department of Chemical and Biomolecular Engineering, in collaboration with a team at Imperial College London, has developed a machine-learning-based simulation method that can quickly and accurately screen MOFs best suited for atmospheric CO₂ capture.
< Figure 1. Concept diagram of Direct Air Capture (DAC) technology and carbon capture using Metal-Organic Frameworks (MOFs). MOFs are promising porous materials capable of capturing carbon dioxide from the atmosphere, drawing attention as a core material for DAC technology. >
To overcome the difficulty of discovering high-performance materials due to the complexity of structures and the limitations of predicting intermolecular interactions, the research team developed a machine learning force field (MLFF) capable of precisely predicting the interactions between CO₂, water (H₂O), and MOFs. This new method enables calculations of MOF adsorption properties with quantum-mechanics-level accuracy at vastly faster speeds than before.
Using this system, the team screened over 8,000 experimentally synthesized MOF structures, identifying more than 100 promising candidates for CO₂ capture. Notably, this included new candidates that had not been uncovered by traditional force-field-based simulations. The team also analyzed the relationships between MOF chemical structure and adsorption performance, proposing seven key chemical features that will help in designing new materials for DAC.
< Figure 2. Concept diagram of adsorption simulation using Machine Learning Force Field (MLFF). The developed MLFF is applicable to various MOF structures and allows for precise calculation of adsorption properties by predicting interaction energies during repetitive Widom insertion simulations. It is characterized by simultaneously achieving high accuracy and low computational cost compared to conventional classical force fields. >
This research is recognized as a significant advance in the DAC field, greatly enhancing materials design and simulation by precisely predicting MOF-CO₂ and MOF-H₂O interactions.
The results of this research, with Ph.D. candidate Yunsung Lim and Dr. Hyunsoo Park of KAIST as co-first authors, were published in the international academic journal Matter on June 12.
※Paper Title: Accelerating CO₂ direct air capture screening for metal–organic frameworks with a transferable machine learning force field
※DOI: 10.1016/j.matt.2025.102203
This research was supported by the Saudi Aramco-KAIST CO₂ Management Center and the Ministry of Science and ICT's Global C.L.E.A.N. Project.
2025.06.29 View 4463